Introduction of significance of salt spray test in ISO9227-2017
1 2 3 4
Skill Support
Introduction of significance of salt spray test in ISO9227-2017

ISO9227-2017 is the latest version of the artificial environment corrosion test salt spray test the corrosion here refers to the material or its performance in the role of the environment caused by damage or deterioration, there are many factors causing corrosion in atmospheric environment, such as oxygen, humidity, temperature and pollutant composition and corrosion factors.
The standard says:There is seldom a direct relation between resista nce to the action of salt spray and resista nce to corrosion in other med ia, becau se several factors in f luencing the progress of corrosion, such as the formation of protective films, vary greatly with the conditions encountered. Therefore, the test results should not be regar ded as a direct guide to the corrosion resista nce of the tested metallic mater ials in all environments where these materials might be used. Also, the perf ormance of different materials during the test should not be taken as a direct guide to the corrosion resista nce of these materials in service.
Neve rtheless, the method described gives a mea ns of check ing that the comparative quality of a meta ll ic mater ial, with or without corrosion pr otection, is maintained.
Different metallic substrates (metals〕 cannot be tested in direct comparison in accorda nce to their corrosion resista nces in salt spray tests. Comparat ive testing is only applicable for the same kind of substrate.
Salt spray tests are generally suitable as corrosion protection tests for rapid analysis for discontinuities, pores and damage in organic and inorganic coatings. In addition, for quality control purposes, comparison can be made between specimens coated with the same coating. As comparat ive tests, however, sa lt spray tests are only suitable if the coatings are sufficiently sim ila r in natu re.
It is often not possible to use results gained from salt spray testi ng as a comparative gu ide to the long-term behaviou r of d ifferent coating system s, since the corrosion stress du ri ng these tests differs significantly from the corrosion stresses encountered in practice.
Artificial simulation of salt spray test and neutral salt spray test, salt spray test, copper accelerated acetic acid salt spray test, cyclic salt fog test. Salt fog test is to change the product in two conditions, such as salt fog and damp heat, and finally check whether the electrical performance and mechanical properties of the whole product have changed.

Article From            Author Bang Instrument co.,ltd
Contact us

Wheelchairs Test Series   Tensile Strength Tester   Paper / Cardboard / Carton   Formaldehyde / VOC   Tape / Stickers   Furniture / Luggage / Office Furniture   Environmental Test Chamber   Temperature and humidity chamber   Mattress testing equipment / Bed Test  

Copyright© 2003-2012 Bang Instrument Co.,LTD Copy right    Backgroud management